How To Change 2002 Toyota Camry Fuel Filter

How to Alter the Fuel Filter on a 1994 Camry

by Tonya Cunningham

panne image by Charly from Fotolia.com

The fuel filter on your 1994 Toyota Camry is designed to keep contaminants out of the gas tank. A well-maintained fuel organization produces efficient gas mileage and a smooth drive, whereas a dingy fuel filter creates costly problems. A fuel filter should be changed every 30,000 miles. It is likely that y'all already have the necessary tools and supplies in your garage to change your own fuel filter. Even if y'all are new to car repair, changing the fuel filter is a relatively uncomplicated task that may be an excellent starting point in beginning to perform your ain routine maintenance.

Step one

Unplug the fuel-relay fuse, which is located just behind the glove box under the passenger-side dashboard.

Step two

Run your engine for as long as it takes to stall out. This ordinarily takes only a couple of minutes, but allows enough time for the fuel system to depressurize equally information technology stalls.

Footstep 3

Unclamp the negative battery cable under your car'south hood. The negative cable is black. Removing this connection will preclude any accidental spark from your engine as yous work under your automobile.

Step 4

Apply your automobile jack to elevate the rear cease of your automobile to a height that volition allow you to work comfortably nether information technology, but with minimal danger.

Step five

Place the jack stands on each side of footing beneath you machine as a prophylactic precaution.

Step 6

Rock your car gently to ensure that it will non collapse the jack stands as you are changing the filter.

Footstep seven

Locate your fuel filter, which a cylinder-shaped object attached on each side by the two fuel lines.

Footstep eight

Position the baste pan just beneath the fuel filter in such a way that it will collect whatsoever liquid that falls from the unit during the filter-changing procedure.

Step 9

Unsnap the small clips that connect the filter to the fuel lines. If the clips are too difficult to firmly pinch with your fingers, utilize the needle-nose pliers together to loosen the filter and gradually bring it down to footing level.

Step x

Mount the new fuel filter in the same position that the previous filter was mounted. The clips will make a slight snapping sound when they lock in properly.

Step eleven

Wipe the fuel organization area with your shop rags, also as any spots the fuel may have dripped on the ground.

Pace 12

Remove the drip pan, old filter, needle-nose pliers and store rags from below the vehicle.

Footstep 13

Take the jack stands out from nether the rear of your Camry, and lower the jack cautiously to ground level.

Step xiv

Re-attach the black (negative) cable to your machine'southward battery under the hood.

Step 15

Plug the fuel-relay fuse back into its outlet, making certain it is snug earlier closing the glove compartment.

Plow your ignition key over several times, waiting approximately five seconds between each plough. Afterward several attempts, the fuel should be flowing throughout the system and your engine will start.

References

Things You'll Demand

Writer Bio